Effect of lactic acid bacterial fermentation on amino acids and volatile compounds of pork trimming hydrolysate

The objective of this research was to improve the volatile flavour profile of a pork trimming hydrolysate by lactic acid bacteria (LAB) fermentation. Five probiotic strains and one dairy strain were used. The dominant aliphatic aldehydes (80.90%) in the unfermented hydrolysate were greatly reduced to <15% by converting into respective carboxylic acids and alcohols after fermentation. Strain GG was the only LAB that produced a significant level of succinic acid (1.62 mg mL⁻¹) and ketones (14.92%) (mainly diacetyl and acetoin) in the hydrolysate. Strains 299V and GG showed moderate proteolytic activities as their amino acid content reduced to 126.05 and 219.14 mg per 10 mL compared to the control (316.45 mg per 10 mL) after fermentation, respectively. However, little amino acid-derived volatiles were found in all fermented samples. These findings indicate that LAB fermentation modulates the flavour compounds of pork hydrolysates, which has the potential to be developed to novel flavouring materials.     

Microbial fuel cells for bioelectricity generation through reduction of hexavalent chromium in wastewater: A review

The study proposes the use of microbial fuel cell (MFC) technology to reduce toxic Cr(VI) present in industrial wastewater to less toxic trivalent chromium [Cr(III)], while generating electricity through a bioelectrochemical oxidation-reduction process. Factors influencing the treatment process and electricity generation include the concentration of Cr(VI) in wastewater, substrate types used for anodes, types of microorganisms involved, types of cathode and anode, surface area of the cathode and anode, and pH and temperature of cathodic and anodic solutions. While other heavy metals in wastewater may be removed by MFC technology, Cr(VI) removal is more efficient in terms of electricity generation. Previous research indicated that the maximum electrical power generated by Cr(VI) removal through the use of MFCs is 1600 mW/m², which is expected to increase as the factors affecting this process are optimized. Based on current data, MFC-based electricity generation along with Cr(VI) removal is a potential future source of sustainable energy. However, research priorities need to focus on reducing the cost of MFC technology by using economical and effective materials and increasing electricity production.     

A review on modeling of solar photovoltaic systems using artificial neural networks,fuzzy logic,genetic algorithm and hybrid models

The uncertainty associated with modeling and performance prediction of solar photovoltaic systems could be easily and efficiently solved by artificial intelligence techniques. During the past decade of 2009 to 2019, artificial neural network (ANN), fuzzy logic (FL), genetic algorithm (GA) and their hybrid models are found potential artificial intelligence tools for performance prediction and modeling of solar photovoltaic systems. In addition, during this decade there is no extensive review on applicability of ANN, FL, GA and their hybrid models for performance prediction and modeling of solar photovoltaic systems. Therefore, this article focuses on extensive review on design, modeling, maximum power point tracking, fault detection and output power/efficiency prediction of solar photovoltaic systems using artificial intelligence techniques of the ANN, FL, GA and their hybrid models. In addition, the selected articles on the solar radiation prediction using ANN, FL, GA and their hybrid models are also summarized. Total of 122 articles are reviewed and summarized in the present review for the period of 2009 to 2019 with 90 articles in the field of {ANN, FL, GA and their hybrid models} + solar photovoltaic systems and 32 articles in the field of {ANN, FL, GA and their hybrid models} + solar radiation. The review shows the suitability and reliability of ANN, FL, GA and hybrid models for accurate prediction of the solar radiation and the performance characteristics of solar photovoltaic systems. In addition, this review presents the guidance for the researchers and engineers in the field of solar photovoltaic systems to select the suitable prediction tool for enhancement of the performance characteristics of the solar photovoltaic systems and the utilization of the available solar radiation.     

Structure development and dielectric properties of Zn-doped Pb([Mg,Fe],W)O3 perovskite ceramics

Ceramic samples of a pseudo-binary system Pb(Mg_1/2W_1/2)O₃-Pb(Fe_2/3W_1/3)O₃ (PMW-PFW) were prepared by solid-state reaction. In addition, their compositions were modified by 20 mol% Pb(Zn_1/2W_1/2)O₃ (PZW) doping in order to investigate the role of zinc in the perovskite formation and dielectric properties. The perovskite contents were ≥95.1% at the overall composition range, except for a significantly low value of 79.0% at 0.8PFW-0.2PZW. The extension of sintering time for PMW accelerated superstructure formation, resulting in the ordering factor increased up to 0.40 after 12 hours heat treatment. The maximum dielectric constant values increased with increasing PFW fractions. In comparison, the phase transition temperatures decreased sharply (by up to 161°C) at low concentrations of PFW, followed by mild changes (by up to 47°C) afterward. The dielectric constant spectra were analyzed in terms of diffuseness characteristics, which reflected the phase transition modes quite well.     

Stimulation of densification during the reduction of U3O8 to UO2 by atmosphere control

A reduction process in the head-end for pyroprocessing has been adopted to avoid oxidation attack on the molybdenum crucible during sintering. The reduction process is employed to reduce U₃O₈ pellets to UO₂ prior to sintering. This allows elimination of the oxygen source, which causes oxidation attack during sintering, thereby permitting the use of a metallic crucible. However, little densification occurs due to the low reduction temperature limited by the INCONEL crucible. Consequently, the amount of material scraps from the pellets increases, thus creating an additional processing burden due to its high radioactivity. To reduce the amount of scraps, densification should be enhanced. This study suggests a simple atmospheric control strategy and clarifies its effects. With the atmospheric control, a higher bulk density and better attrition resistance were obtained in comparison to without this strategy. This can be explained in terms of O/U ratio dependent diffusion kinetics during the reduction of U₃O₈ to UO₂.     

Luminescent and magnetic properties of cerium-doped yttrium aluminum garnet and yttrium iron garnet composites

Functional materials exhibiting magnetic and luminescent properties have been recognized as an emerging class of materials with great potential in advanced applications. Herein, properties of multifunctional ceramic composites consisting of two garnets, luminescent cerium-doped Y₃Al₅O₁₂ (Ce:YAG) and magnetic Y₃Fe₅O₁₂ (YIG), are reported. On increasing the sintering temperature, both the photoluminescence and saturation magnetization of the Ce:YAG-YIG composites decreased gradually because of the interdiffusion of trivalent ions such as Al³⁺ and Fe³⁺. At a constant sintering temperature of 1100?°C, the YIG contents in the composites increased, thereby causing their luminescent properties to degrade and the saturation magnetizations to increase. For application to electronics, Ce:YAG-YIG composite thin films were integrated on quartz substrates by sputtering the ceramic target. The composite thin films exhibited both magnetic and luminescent properties after annealing. These techniques facilitate the incorporation of multifunctional nanocomposites into various devices.     

Quantitative measurements of nanoparticle layer thicknesses near the contact line region after droplet drying-out

Journal of Mechanical Science and Technology - Confocal fringe patterns of evaporating sessile drops have provided initial evidence of the presence of a sub-micron thin liquid film emanating from...     

Dansameum regulates hepatic lipogenesis and inflammation in vitro and in vivo

Food Science and Biotechnology - Although the clinical guidelines for nonalcoholic fatty liver disease (NAFLD) therapy recommended hepato-protection and exercise to reduce body weight, no...